How to change or spoof a MAC Address in Ubuntu and Linux Mint

When connecting to external Wi-Fi networks, privacy is required. By changing your MAC address, you can make sure that no one can trace or track you.

Computer networking is primarily based on IP addresses. To explain the relevance of IP address, we’re going to briefly describe how these networks work with the example of the internet.

Functioning of Networks

When we have a device connected to the internet, and we enter the URL of a website, say ‘www.fosslinux.com,’ what we are doing is asking the internet to search for the server of ‘FOSS Linux,’ and request them to share their data with us. This part of the process is called ‘request.’

Later, the server detects the request and analyzes whether to, or whether not to share the data. If yes, it sends a webpage to the system that requested it, and that is how we can see the homepage of a website. This part is called the ‘response.’ This whole process is repeated again and again with every link we click, and every website we visit.

All well and good. But how does it reach the target server/system? An IP address is a reference that the internet uses to reach a website server or your system. We can use the analogy of a mail letter here. Sending a letter to someone requires an address, and so does posting a reply to that very letter. In that case, it requires the geographical address, while in the case of computers, it requires the IP address.

The IP address, though, only helps data to go as far as the router that the system is connected. After that, the router requires the MAC address of the exact system (that is currently connected to that router) to route the data to that system. That is how you obtain the data on the internet.

MAC addresses Usage

With all that explained, the basic idea is that the MAC address is a unique number or address that can be used to identify your system correctly. Our systems can interact with the networks using network cards of some sort or the other. There are most commonly wireless cards (for Wi-Fi) and ethernet cards (for wired connections). All the network cards in the world have a unique MAC address.

Why you might want to change your MAC address

  • For privacy – When connecting to external Wi-Fi networks, privacy is required. By changing your MAC address, you can make sure that no one can trace or track you.
  • For using specific services – Some services are bound to work on only a particular range of MAC addresses. You can change your MAC address to whatever you desire, and you can then use that service.

View MAC Address

To view the MAC address on your system, we will describe two commands, and you can use any of them. If one doesn’t work on your system, the other one definitely will.

IP command

Use this command:

ip link

It gives information about the networking hardware of a system. It will contain information of all the interfaces available and have the MAC address next to the part saying ‘link/ether‘ for each interface.

IP command.
IP command

ifconfig

Next, you can use the Swiss-Army knife of network interface tools, ifconfig to view your networking hardware information. Use this command:

ifconfig -a

The output is a little messier but has way more information. But just because it is more powerful and shows more information, doesn’t mean that its better. If you wish to find out the MAC address, and general information, the ip command is better in my opinion, because it shows more streamlined and to-the-point information.

ifconfig output.
ifconfig output

In the output of ifconfig, you’ll find information categorized according to the interface. The MAC address, here too, is next to the word ‘ether‘ for various interfaces.

Changing MAC Address

Prerequisite

IMPORTANT:: Before changing the MAC address, you have to switch it off. To do that, you must first know the name of the network interface on your device. Use the same commands as above, ip or ifconfig, and you’ll get a list of network interfaces in both.

If its a wired connection, it will have the part ‘eth‘ or ‘enp‘ in the interface name. If wireless, it will have ‘wlan‘ or ‘wlp‘ in the name. The key element is ‘e’ for wired, and ‘w’ for wireless. For example, here:

IP command.
IP command

enp1s0‘ means wired connection, and ‘wlp2so‘ means wireless connection.

Now, to turn it off, use this command:

sudo ifconfig <interface name> down

If you do not have ifconfig installed, install it using:

sudo apt-get install net-tools

Now for the main task, a program that helps change the MAC address very quickly. The tool is called macchanger (the name says it all). Install it using:

sudo apt-get install macchanger

You will get a prompt asking whether you want to automatically reset the MAC address each time you connect/disconnect utilizing a network interface. Choose as you desire.

MACChanger prompt
MACChanger prompt

Changing the MAC address to a random value

To change the MAC address to a random value, use the following command:

sudo macchanger -r <interface name>

Setting a random MAC address.
Setting a random MAC address

The output will be shown, with the previous and the current MAC address.

Changing the MAC address to a specific value

To change it to a particular number, you must enter the command in the following format:

sudo macchanger -m xx:xx:xx:xx:xx:xx <interface name>

Setting a specific MAC address.
Setting a specific MAC address

Enter whatever address that you desire instead of ‘xx:xx:xx:xx:xx: xx.’ make sure that the length and format are exact.

Restore original MAC address

To restore the original, or ‘permanent’ MAC address, use the following command:

sudo macchanger -p <interface name>

Restoring original MAC address.
Restoring original MAC address

It will change your MAC address to the original MAC address of your hardware.

Conclusion

That is all you will ever need to change your MAC address. Just as a caution, do not misuse this freedom that Linux provides you, to create a nuisance. You can be comparatively safer by changing your MAC address, but not invincible. Even after changing the MAC address, you must keep yourself secure on public networks.

Pulkit Chandak
Pulkit Chandak is a Linux enthusiast and has been using and experimenting with open source software and hardware too since a long time. He is a huge admirer of open source software and wants to ventilate it to all around him. He is interested in reviewing and writing tutorials on Linux and its many distributions. He believes that freedom in software leads to freedom of the mind from the chains of limits.

4 COMMENTS

  1. after you’ve changed your MAC address, be sure to input sudo service network-manager restart to enable your network.

  2. Great tutorial until the next Bump. Any wisdom for changing the mac address while using a vpn? My vpn takes over parameters for mac…

Leave a Reply to matt Cancel reply

Please enter your comment!
Please enter your name here

STAY CONNECTED

23,273FansLike
385FollowersFollow
16SubscribersSubscribe

LATEST ARTICLES

MUST READ

Buyers who wish to go for a machine that is based on Linux often show interest in Chromebooks due to the form factor and extended battery life capabilities. Although ChromeOS power these machines, users can still miss out on a more genuine Linux experience. For those who happen to agree, the new Lemur Pro by System76 might get some heads turning.
Linux is growing faster than ever. As per the latest report, there is a drop in the Windows 10 market share for the first time, and Linux's market share has improved to 2.87% this month. Most of the features in the list were rolled out in the Pop OS 20.04. Let's a detailed look into the new features, how to upgrade, and a ride through video.

3 Best Ways to Uninstall Software on Ubuntu

Uninstallation of programs can be done by graphical way using the Ubuntu Software Center, and the Synaptic Package manager. Command-line way of doing it is also possible using apt-get and aptitude commands. We shall discuss each one of them in detail.

The 10 Best Linux Server Distros For Home And Businesses

By the year 2020, it is estimated that there are close to 600 Linux distributions in the market. It includes both servers and Desktop versions; therefore, if you are looking for lightweight Linux distribution for your old PC or a reliable desktop version for employees in your organization, you may be overwhelmed with the number of choices for finding one for your use.

Best Laptops for Linux and Apps Development [2020]

Apart from your programming skills, there are a few other things that can also influence the way you code, and one of them is your computer system for sure. Even though it isn't like you can't code on a regular PC or laptop, speaking from personal experience, you can make the most out of your programming skillset by going for a computer with high specs and one that's been specially designed for such tasks.

What is the difference between Linux and Unix?

When discussing Linux and Unix with average users, it's not uncommon that they will sometimes mistakenly interchange the terms Linux and Unix.  The two are not the same.  Though they share similarities in their overall structures and toolkits, they are decidedly not the same.