Home Ubuntu How to install NFS Server and Client on Ubuntu

How to install NFS Server and Client on Ubuntu

by Hend Adel
setup nfs server ubuntu

Network File System or NFS is a protocol for file systems. Using NFS protocol allows you to share files and directories on your machine with other users machines across the network.

The NFS is built on a client-server model, where the NFS server is responsible for handling the authentication and managing the data shared over the network.

In this article, we will cover installing NFS on both server and client computers, allowing you to share your files or directories from one Ubuntu machine to another.

Here is a summary of what we are going to do:

  1. Install the NFS Server on a machine, and we will call it the server machine.
  2. Create an export directory which we will use to share with the clients.
  3. Install the NFS client on a second machine, and we will call it the client machine.
  4. Make a simple test to ensure that everything is running successfully.

It’s highly recommended that you follow those steps in order and this to ensure everything will run smoothly.

Installing NFS Server

Step 1. Before starting the installation of the NFS server, you have to make sure that your system is up-to-date using the following commands:

sudo apt-get update
sudo apt-get upgrade

Step 2. Check if the NFS kernel server package is installed on your Ubuntu using the following command.

dpkg -l | grep nfs-kernel-server
Check NFS Server Is Installed Or Not

Check NFS Server Is Installed Or Not

As you can see in the above screenshot, if there is no output, then the NFS kernel server package is not installed on your machine.

Step 3. Now let’s install the latest available NFS kernel server package using the following command.

sudo apt install nfs-kernel-server
Install NFS Kernel Server Package

Install NFS Kernel Server Package

Create The Export Directory

This export directory will be shared with the clients’ machines over the network.

Step 1. Create an export directory in the NFS server that will be shared over the network.

sudo mkdir -p /mnt/nfsdir

Step 2. To allow access to all the clients to the previous export directory, remove the current restrictive permissions on the directory.

sudo chown nobody:nogroup /mnt/nfsdir

Step 3. Assign new permissions to the export directory.

sudo chown nobody:nogroup /mnt/nfsdir

The output of the previous commands should be like below:

Create The Expor Directory and Assign required permissions

Create The Export Directory and Assign required permissions

Step 4. Using your favorite editor, edit in the export configuration file to allow clients access to the NFS server export directory.

sudo vi /etc/exports

Now choose one of the following options to allow access to the server export directory:

  • Allow access to a single client by specifying the client’s machine IP.
/mnt/nfsdir client_IP(rw,sync,no_subtree_check)

The (rw, sync,no_subtree_check) permissions are defined as follows:

    • rw –> The client is allowed to perform a read and write operations.
    • sync –> The client can perform writing any change to the disc.
    • no_subtree_check –> The client has no permission to check the subtree.
  • Allow access to multiple clients by specifying the clients’ machines IPs.
/mnt/nfsdir client_IP_1(rw,sync,no_subtree_check)
/mnt/nfsdir client_IP_2(rw,sync,no_subtree_check)
/mnt/nfsdir client_IP_3(rw,sync,no_subtree_check)
  • Allow access to multiple clients by specifying the entire subnet.
/mnt/nfsdir subnetIP/24(rw,sync,no_subtree_check)

Here in our tutorial, we will use the last option to allow access to multiple clients by specifying the entire subnet.

Allow Access to Clients Using the NFS Export File

Allow Access to Clients Using the NFS Export File

Step 5. Next, we will apply the previous changes using the following command.

sudo exportfs -a
Export The NFS shared directory

Export The NFS shared directory

Step 6. Restart the NFS kernel server service.

sudo systemctl restart nfs-kernel-server
Restart The NFS Kernel Server

Restart The NFS Kernel Server

Step 7. Configure NFS server machine firewall to allow clients to access the export directory content.

sudo ufw allow from 192.168.1.0/24 to any port nfs
Configure NFS Server Machine Firewall

Configure NFS Server Machine Firewall

Step 8. Enable NFS server firewall to start automatically with the system startup.

sudo ufw enable
Enable Firewall On System Startup

Enable Firewall On System Startup

Step 9. Now check the status of the firewall to view the added rule from previous steps.

sudo ufw status
Check The Firewall Added Rules

Check The Firewall Added Rules

Install The NFS Client On a Second Machine

Next, we need to perform some configurations on the clients’ machines so they can easily access the NFS server export directory. But before we start our configurations, we need first ensure that the clients’ machines are up-to-date using the commands below.

sudo apt-get update 
sudo apt-get upgrade

Step 1. Install the NFS client package using the following command.

sudo apt-get install nfs-common
Install NFS Client Package

Install NFS Client Package

Step 2. Create a mount point for the NFS server export directory.

sudo mkdir -p /mnt/nfsdirclient
Create Mount Point For The NFS Shared Directory

Create Mount Point For The NFS Shared Directory

Step 3. Now let’s mount the shared NFS directory on the client.

sudo mount 192.168.1.4:/mnt/nfsdir /mnt/nfsdirclient
Mount The NFS Shared Directory On The Client Machine

Mount The NFS Shared Directory On The Client Machine

Test Your Installation

Step 1. On the server machine, create a test file in the export directory.

touch /mnt/nfsdir/nfstestfile
Create Test File In the NFS Server Export Directory

Create Test File In the NFS Server Export Directory

From the client machine, check the newly created file.

ls /mnt/nfsdirclient

The output should be like below:

Check Created File In The Client Machine

Check Created File In The Client Machine

Step 2. On the client machine, create a new file.

touch /mnt/nfsdirclient/clienttestflie
Create Test File In the NFS Client Directory

Create Test File In the NFS Client Directory

From the server machine, check for the previously created file.

ls /mnt/nfsdir

The output should be something like the below:

Check Created File In The Server Machine

Check Created File In The Server Machine

That’s all about how to install the NFS server and client, and also testing your configurations.

You may also like

4 comments

Manel July 11, 2019 - 10:04 PM

2nd of your articles read. “Thanks for reading my article” says on end note. On the very contrary, all the thanks to you, and even more “thanks” if with your explanation I’m able to make it work. New to Linux world but already in love with it.

Reply
cis January 20, 2020 - 6:02 AM

But how to ensure the nfs service itself loads/starts at system startup? (I am guessing this is not the same as the firewall)

Reply
Leandro May 28, 2020 - 4:16 PM

Good post, thanks a lot! Please review step 3, I think you made a mistake (typo?) there.

Reply
Cranjis McBasketball June 16, 2020 - 3:06 PM

for those wondering how to re enable their network, enter this into the terminal;
sudo ifconfig up

Reply

Leave a Reply to Leandro Cancel Reply

fl_logo_v3_footer

ENHANCE YOUR LINUX EXPERIENCE.



FOSS Linux is a leading resource for Linux enthusiasts and professionals alike. With a focus on providing the best Linux tutorials, open-source apps, news, and reviews written by team of expert authors. FOSS Linux is the go-to source for all things Linux.

Whether you’re a beginner or an experienced user, FOSS Linux has something for everyone.

Follow Us

Subscribe

©2016-2023 FOSS LINUX

A PART OF VIBRANT LEAF MEDIA COMPANY.

ALL RIGHTS RESERVED.

“Linux” is the registered trademark by Linus Torvalds in the U.S. and other countries.