Home Linux Mint Perfect guide to delete Linux Mint and restore Windows

Perfect guide to delete Linux Mint and restore Windows

by Kiran Kumar
Delete Linux Mint and restore Windows

So you took the great plunge and tried out Linux by dual-booting Linux Mint and Windows 10? And for some reason now you decided to undo everything such as uninstall Linux Mint, clean up grub (bootloader), and revert your PC to Windows only state like it was before? Being a Linux lover, I’m hoping your step could be because you were playing around on Linux and something went wrong, and you want to start-all-over again from a clean slate.

Delete Linux Mint and restore Windows

 

In this article my focus is to give you step-by-step guide of uninstalling Linux on your computer with minimal resources and time, and without spending a penny.

Remove Linux Mint and Restore Windows 10


A: Backup Personal Data from the Linux Partition

Before you jump on uninstalling Linux Mint, make sure you have backed up any personal downloads and data to a external hard disk or USB! I know you will, but just in case you are in hurry and forgot about it!


B: Restore Windows MBR

Linux Mint installs GRUB bootloader to handle which OS you will boot into. Now that you want to remove Linux Mint, there is no need of GRUB anymore and your PC should directly boot into Windows like it used to before you installed Linux Mint. In this step, we will remove GRUB and restore Windows MBR (Master Boot Record).

1. Boot into Windows 10.

2. Type ‘Recovery’ in the programs search box and launch ‘Recovery Options’.

3. You should be on ‘Recovery’ section in the left pane. Click on ‘Restart now’ in the ‘Advanced startup’ section.

Windows 10 - Recovery Startup

Windows 10 – Recovery Startup

4. Click ‘Troubleshoot’.

Troubleshoot

Troubleshoot

5. Click ‘Advanced Options’.

Advanced Options

Advanced Options

6. Click ‘Command Prompt’.

Command Prompt

Command Prompt

7. Your computer will boot into GRUB one last time! Select Windows 10 and continue.

8. Windows 10 will launch Command Prompt and it will ask you to login. The user must have administrator rights.

9. In the Command Prompt, type the following command and hit enter. You should see message ‘The operation completed successfully’. This means GRUB is now deleted and replaced with Windows Master Boot Record.

bootrec /fixmbr
Command Prompt -Reset MBR command

Command Prompt -Reset MBR command

10. Type ‘exit’ and hit enter.

exit

11. Click ‘Turn off your PC’.

12. Switch ON the PC. Your computer now should boot straight into Windows 10.


C. Delete Linux Mint Partition

Now that you have reset the boot record, all you have to do now is to delete the Linux Mint partition and the SWAP partition (if you had created it), so that you can gain the hard disk space back.

1. Boot into Windows 10 again.

2. Type ‘Disc Management’ in the taskbar search box and launch ‘Create and format hard disk partitions’.

3. Now you should recogize which is Windows partition, and which are Linux Mint and SWAP partitions. One quick way of identification is to see the format. Windows will be NTFS file system, while Linux Mint and SWAP partitions will be shown as blank as Windows can’t read the ext3 (Linux file system). You won’t even see Volume labels of the Linux partitions. And since Windows can’t read it, you will see 100% free space left even though there is entire Linux Mint OS still there! In my test PC, the first two partitions are Linux – the 46.05 GB is the main ext3 partition and the 2.78 GB is the SWAP partition. C: is my Windows partition evident from NTFS file system. Don’t do anything with the ‘System Reserved partition’. It is needed for Windows.

Windows Disk Management

Windows Disk Management

4. Right-click on each Linux partitions and select ‘Delete Volume’. In my case I would delete the first two partitions.

Delete Volume

Delete Volume

5. Windows will give a warning that the selected partition is not created by Windows. Go ahead and click ‘Yes’.

6. After deleting the Linux and SWAP partitions, you will see GREEN color code showing free partition.

Free Space

Free Space

7. You can now right click on this ‘Free Space’ partition and select ‘New Simple Volume’ and proceed with the wizard to create a new partition. Make sure to select NTFS file system as format so that Windows can read it and you can use that partition again.

New NTFS Partition

New NTFS Partition


Were you successful in deleting Linux Mint and restoring Windows? Do let us know in comments below.

You may also like

17 comments

Luke W Kiowski February 4, 2019 - 6:52 PM

When I follow all of the steps to restore the Windows MBR and finish by turning of the PC, I power it back on and the grub menu is still there.

Is there anything I can do to fix this? Or am I ok to continue with the rest of the guide even though I’m still reaching the grub menu?

Reply
Atang May 27, 2020 - 10:46 PM

Same here 🙁
Any solutions?

Reply
We Observed February 14, 2019 - 6:18 AM

Nice One Actually, I tried with CMD Method and succeed

Reply
anonymous February 14, 2019 - 6:26 PM

can you help me ? Before i installed Linux mint 19.1, i’ve created a partition for it. during installation, i forgot to go to ‘something else’ check button. then, i think the Linux is installed in the same partition as Windows but i couldnt see any program files of Linux on Windows. i dont want to mess with the C: drives but now i’m worried. it still run as usual but can i at least retrieve all linux program files and start over the steps by reinstalling it back. thank you. it will be much of a help from you 🙂

Reply
julius December 31, 2019 - 10:13 AM

I would be more helpful to show how to add the free space as usable space for the Windows partition.
I used Parted Magic to do just that.

Reply
Patrick Blackwelder January 7, 2020 - 1:33 PM

hoe do i delete linux mint

Reply
John Shepherd January 29, 2020 - 1:48 PM

I followed the steps to remove GRUB and restore Windows MBR. I believe they worked fine as I now boot direct to Windows. However, trying to delete the Linix Mint Partitions did not work. Right clicking on the Linux partition did nor bring up ‘delete Volume’. What came up was a ‘help’ button. That suggested expanding the Windows partition, but when I tried that, the ‘expand’ option was grayed out. I really want to try this Linux system but need to find out what went wrong with the initial install. It sort of worked but its response tine was very slow. It seemed to take minutes before it would respond. All suggestions are welcome. Thanks

Reply
Joe March 30, 2020 - 7:00 PM

This is great provided you installed linux along side windows using a dual boot scheme. However, for those off us who didn’t do so, and are now stuck with Linux as the only OS… kind of makes this guide less than useful. So far, there isn’t anything at all that can tell us how to remove linux all together, and reinstall windows as the OS.

Reply
Piero Giorgi December 19, 2020 - 2:53 PM

Reformat the disk.

Reply
Jack April 7, 2020 - 7:07 AM

I have the same problem as Mr Kiowski. So how about an answer to his question?

Reply
austin hyde April 19, 2020 - 3:27 AM

im not dual booting windows and linux i just have linux and i need to fully replace linux and go back to windows HOW

Reply
Camille May 20, 2020 - 6:42 AM

Useful And successful!

Reply
John June 12, 2020 - 4:12 PM

I am in the same position. There was only one program that I like and it only runs in Windows or IOS-X. I have my Linux Mint as the only operating system. I am still checking , But it looks like the ONLY option may be to purchase a new HD! If anybody has had success in deleting Linux please let me know!!

Reply
Jens Olsen July 2, 2020 - 10:06 AM

Got rid of Linux Mint and everything back to normal, thanks! Great info!!

Reply
Julius ceaser January 18, 2021 - 8:21 AM

How do I delete Linuxmint cinnamon v20.1 using Linux commandline

Reply
Osvaldo June 14, 2021 - 10:09 PM

After following all instructions, I restarted my computer and the following displayed after reboot:
GNU GRUB version 2.04

Minimal BASH-like line editing is supported. For the first word, TAB lists possible command completions. Anywhere else TAB lists possible device or file completions.

grub>

Reply
Michael Walsh October 5, 2021 - 3:59 PM

After step 9 of “B: Restore Windows MBR” you show a screenshot pointing to a “B” icon that is labeled “Antivir.” It seems completely irrelevant to the description about using the Command Prompt.

In step 4 of “C. Delete Linux Mint Partition” you are describing how to delete a Volume using Windows Disk Management, but you show a screenshot of GParted. That is a bit of a leap! How do you jump from Disk Management to GParted?

Thank you

Reply

Leave a Reply to Luke W Kiowski Cancel Reply

fl_logo_v3_footer

ENHANCE YOUR LINUX EXPERIENCE.



FOSS Linux is a leading resource for Linux enthusiasts and professionals alike. With a focus on providing the best Linux tutorials, open-source apps, news, and reviews written by team of expert authors. FOSS Linux is the go-to source for all things Linux.

Whether you’re a beginner or an experienced user, FOSS Linux has something for everyone.

Follow Us

Subscribe

©2016-2023 FOSS LINUX

A PART OF VIBRANT LEAF MEDIA COMPANY.

ALL RIGHTS RESERVED.

“Linux” is the registered trademark by Linus Torvalds in the U.S. and other countries.